LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2004 >> Altima S, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 1046 (Engine Mechanical (VK56DE)) >> Service Data And Specifications (SDS) >> Service Data And Specifications (SDS) >> Standard and Limit >> Camshaft And Camshaft Bearing

Camshaft And Camshaft Bearing

WARNING: This page is about a different car, the 2012 Nissan Pathfinder. However, it is still accessible from the selected car via links, so may be relevant.
Unit: mm (in)
Items Standard
Camshaft runout [TIR(1)] Less than 0.02 (0.0008)
G04878529
Camshaft cam height "A" Intake 44.865 - 45.055 (1.7663 - 1.7738)
Exhaust 45.075 - 45.265 (1.7746 - 1.7821)
Cam wear limit 0.02 (0.0008)
Outside diameter of camshaft journal 25.950 - 25.970 (1.0217 - 1.0224)
Camshaft bracket inside diameter 26.000 - 26.021 (1.0236 - 1.0244)
Camshaft journal clearance 0.030 - 0.071 (0.0012 - 0.0028)
Camshaft end play 0.115 - 0.188 (0.0045 - 0.0074)
Camshaft dimension (A) for No. 1 journal 30.500 - 30.548 (1.2008 - 1.2027)
Cylinder head dimension (B) for No. 1 journal 30.360 - 30.385 (1.1953 - 1.1963)
Camshaft sprocket runout [TIR(1)] Less than 0.15 (0.0059)
(1) Total indicator reading

Valve Seal

Unit: mm (in)
Items Standard
Height (H) (without valve spring installed) 14.300 - 14.900 (0.5630 - 0.5870)

Valve Lifter

Unit: mm (in)
Items Standard
Valve lifter diameter 33.977 - 33.987 (1.3377 - 1.3381)
Valve lifter hole diameter 34.000 - 34.016 (1.3386 - 1.3392)
Clearance between lifter and lifter guide 0.013 - 0.039 (0.0005 - 0.0015)

Valve Clearance

Unit: mm (in)
Items Hot(1) Cold
Intake 0.304 - 0.416 (0.012 - 0.016) 0.26 - 0.34 (0.010 - 0.013)
Exhaust 0.308 - 0.432 (0.012 - 0.017) 0.29 - 0.37 (0.011 - 0.015)
(1) Approximately 80°C (176°F)

Available Valve Lifter

Unit: mm (in)
Identification (stamped) Mark(1) Thickness
G04878530
N788 7.88 (0.3102)
N790 7.90 (0.3110)
N792 7.92 (0.3118)
N794 7.94 (0.3126)
N796 7.96 (0.3134)
N798 7.98 (0.3142)
N800 8.00 (0.3150)
N802 8.02 (0.3157)
N804 8.04 (0.3165)
N806 8.06 (0.3173)
N808 8.08 (0.3181)
N810 8.10 (0.3189)
N812 8.12 (0.3197)
N814 8.14 (0.3205)
N816 8.16 (0.3213)
N818 8.18 (0.3220)
N820 8.20 (0.3228)
N822 8.22 (0.3236)
N824 8.24 (0.3244)
N826 8.26 (0.3252)
N828 8.28 (0.3260)
N830 8.30 (0.3268)
N832 8.32 (0.3276)
N834 8.34 (0.3283)
N836 8.36 (0.3291)
(1) Always check with the Parts Department for the latest parts information.