LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2004 >> Altima S, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 1044 (Engine Mechanical (VQ40DE)) >> Removal And Installation >> Intake Manifold >> Removal and Installation >> Removal

Removal and Installation: Removal

WARNING: This page is about a different car, the 2012 Nissan Pathfinder. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove intake manifold collector. Refer to "REMOVAL AND INSTALLATION ".
  2. Remove fuel tube and fuel injector assembly. Refer to "REMOVAL AND INSTALLATION ".
  3. Loosen nuts and bolts with power tool in reverse order as shown to remove intake manifold.
    Fig 1: Tightening Sequence Of Intake Manifold Collector Bolt And Nuts
    G04893989Courtesy of NISSAN NORTH AMERICA, INC.
  4. Remove gaskets.
    CAUTION: Cover engine openings to avoid entry of foreign materials.
scientia non olet · About LEMON Manuals