LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2004 >> Altima S, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 1044 (Engine Mechanical (VQ40DE)) >> Removal And Installation >> Ignition Coil >> Removal and Installation >> Removal (LH)

Removal (LH)

WARNING: This page is about a different car, the 2012 Nissan Pathfinder. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the engine room cover, (if equipped) using power tool. Refer to "REMOVAL AND INSTALLATION ".
  2. Move aside harness, harness bracket, and hoses located above ignition coil.
  3. Disconnect the harness connector from the ignition coil.
  4. Remove the ignition coil.
    CAUTION: Do not shock ignition coil.
scientia non olet · About LEMON Manuals