LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2004 >> Altima S, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 1043 (LAN System (Can Fundamental)) >> System Description >> Trouble Diagnosis >> CAN Diagnostic Support Monitor >> Monitor Item (Consult)

Monitor Item (Consult)

WARNING: This page is about a different car, the 2012 Nissan Pathfinder. However, it is still accessible from the selected car via links, so may be relevant.

Example: CAN DIAG SUPPORT MNTR indication

Fig 1: Example Of CAN DIAG Support MNTR Indication
G08169072Courtesy of NISSAN NORTH AMERICA, INC.
ITEM DESCRIPTION CHART (WITHOUT PAST)

Item PRESENT Description
Initial diagnosis OK Normal at present
NG Control unit error (Except for some control units)
Transmission diagnosis OK Normal at present
UNKWN Unable to transmit signals for 2 seconds or more.
Diagnosis not performed
Control unit name (Reception diagnosis) OK Normal at present
UNKWN Unable to receive signals for 2 seconds or more.
Diagnosis not performed
No control unit for receiving signals. (No applicable optional parts)
ITEM DESCRIPTION CHART (WITH PAST)

Item PRESENT PAST Description
Transmission diagnosis OK OK Normal at present and in the past
1 - 39 Normal at present, but unable to transmit signals for 2 seconds or more in the past. (The number indicates the number of ignition switch cycles from OFF to ON.)
UNKWN 0 Unable to transmit signals for 2 seconds or more at present.
Control unit name (Reception diagnosis) OK OK Normal at present and in the past
1 - 39 Normal at present, but unable to receive signals for 2 seconds or more in the past. (The number indicates the number of ignition switch cycles from OFF to ON.)
UNKWN 0 Unable to receive signals for 2 seconds or more at present.
Not diagnosed - Diagnosis not performed.
No control unit for receiving signals. (No applicable optional parts)