LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2004 >> Altima S, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 1042 (Heater & Air Conditioning System) >> Removal And Installation >> High-Pressure Flexible Hose >> Removal and Installation for Front High-pressure Flexible A/C Hose >> Removal

Removal and Installation for Front High-pressure Flexible A/C Hose: Removal

WARNING: This page is about a different car, the 2012 Nissan Pathfinder. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the front left wheel and tire assembly. Refer to "ADJUSTMENT ".
  2. Remove the front left fender protector. Refer to "REMOVAL AND INSTALLATION OF FRONT FENDER PROTECTOR ".
  3. Discharge the refrigerant. Refer to "HFC-134A (R-134A) SERVICE PROCEDURE ".
  4. Remove the front high-pressure flexible A/C hose. Refer to "COMPONENT ".
    CAUTION: Cap or wrap the joint of the pipe with suitable material such as vinyl tape to avoid the entry of air.