Inspection and Adjustment - Adjustable Pedal: Inspection

WARNING: This page is about a different car, the 2012 Nissan Pathfinder. However, it is still accessible from the selected car via links, so may be relevant.

Inspect the brake pedal free height (H) from the floor using Tool at a 90° angle to the floor as shown.
Tool number: - (J-46532)

Adjust the height referring to the following specifications.

CAUTION: When equipped with adjustable pedal, the pedal must be in the forward most (closest to the floor) position for pedal height measurement.

Fig 1: Inspecting Brake Pedal Free Height (H)

BRAKE PEDAL SPECIFICATIONS

Unit: mm (in)
Pedal free height (H) with pedal in forward most position	Refer to "BRAKE PEDAL ".
Pedal full stroke (T)	Refer to "BRAKE PEDAL ".
Clearance between brake pedal bracket and threaded end of stop lamp switch and ASCD cancel switch	Refer to "BRAKE PEDAL ".

CAUTION: When equipped with adjustable pedal, the pedal must be in the forward most position (closest to the floor) for pedal height adjustment.