LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2004 >> Altima S, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 1037 (Warning Chime System) >> Ecu Diagnosis >> Combination Meter >> DTC Index

DTC Index

WARNING: This page is about a different car, the 2009 Nissan Maxima. However, it is still accessible from the selected car via links, so may be relevant.
DTC INDEX

CONSULT-III display Malfunction Reference page
CAN COMM CIRCUIT [U1000] When combination meter is not transmitting or receiving CAN communication signal for 2 seconds or more. XX-XX, "*****"
CONTROL UNIT (CAN) [U1010] When detecting error during the initial diagnosis of the CAN controller of combination meter. XX-XX, "*****"
VEHICLE SPEED [B2205] The abnormal vehicle speed signal is input from the ABS actuator and electric unit (control unit) for 2 seconds or more. XX-XX, "*****"
ENGINE SPEED [B2267] If ECM continuously transmits abnormal engine speed signals for 2 seconds or more. XX-XX, "*****"
WATER TEMP [B2268] If ECM continuously transmits abnormal engine coolant temperature signals for 60 seconds or more. XX-XX, "*****
NOTE: "TIME" indicates the following.
  • 0: Indicates that a malfunction is detected at present.
  • 1-63: Indicates that a malfunction was detected in the past. (Displays number of ignition switch OFF → ON cycles after malfunction is detected. Self-diagnosis result is erased when "63" is exceeded.)
scientia non olet · About LEMON Manuals