Removal and Installation: Installation

WARNING: This page is about a different car, the 2009 Nissan Maxima. However, it is still accessible from the selected car via links, so may be relevant.

Installation is in the reverse order of removal.

Check that the wheel bearings operate smoothly.
Check that the wheel hub bearing axial end play is within specification.

Fig 1: Checking Axial End Play With Dial Gauge
Courtesy of NISSAN MOTOR CO., U.S.A.

Axial end play: 0.1 mm (0.004 in) or less
Tighten wheel nut to specification. Refer to "ROAD WHEEL ".