LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2004 >> Altima S, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 1034 (Rear Suspension) >> On-Vehicle Repair >> Rear Stabilizer >> Removal and Installation >> Removal

Removal and Installation: Removal

WARNING: This page is about a different car, the 2009 Nissan Maxima. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disconnect the stabilizer bar from connecting rod, using power tools.
  2. Remove the stabilizer bar clamps and bushings using power tools.
  3. Remove the stabilizer bar.
    Fig 1: Identifying Stabilizer Bar Bushing
    G04887065Courtesy of NISSAN MOTOR CO., U.S.A.
scientia non olet · About LEMON Manuals