LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2004 >> Altima S, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 1034 (Rear Suspension) >> On-Vehicle Repair >> Front Lower Link >> Removal and Installation >> Removal

Removal and Installation: Removal

WARNING: This page is about a different car, the 2009 Nissan Maxima. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the front lower link nut and bolt from the knuckle side and the adjusting bolt and nut from the suspension member side using power tools.
    • Do not reuse the adjusting nut, use a new adjusting nut for installation.
  2. Remove the front lower link.
    Fig 1: Identifying Adjusting Bolts
    G04887059Courtesy of NISSAN MOTOR CO., U.S.A.
scientia non olet · About LEMON Manuals