Remote Keyless Entry Function Malfunction
WARNING: This page is about a different car, the 2009 Nissan Maxima. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
- Before performing the diagnosis in the following table, check "WORK FLOW". Refer to "WORK FLOW ".
- Check that vehicle is under the condition shown in "Conditions of vehicle" before starting diagnosis, and check each symptom.
- If the following symptoms are detected, check systems shown in the "Diagnosis/service procedure" column in this order.
Conditions of Vehicle (Operating Conditions)
- Intelligent Key is out of key slot.
- Ignition switch is in OFF or ACC position.
- All doors are closed.
- Retained power operation does not operate. Refer to "INTELLIGENT KEY: SYSTEM DESCRIPTION ".
SYMPTOM REFERENCE CHART
| Symptom | Diagnosis/service procedure | Reference |
|---|---|---|
| All of the remote keyless entry functions do not operate. | 1. Check Intelligent Key battery inspection. | INTELLIGENT KEY |
| 2. Check Intermittent Incident. | WATERPROOF CONNECTOR INSPECTION | |
| Selective unlock function does not operate by Intelligent Key. | 1. Check "DOOR LOCK-UNLOCK SET" setting in "WORK SUPPORT". | DOOR LOCK: CONSULT-III FUNCTION (BCM - DOOR LOCK) |
| 2. Check Intelligent Key battery inspection. | INTELLIGENT KEY | |
| 3. Check Intermittent Incident. | WATERPROOF CONNECTOR INSPECTION | |
| Auto lock function does not operate normally. | 1. Check "AUTO LOCK SET" setting in "WORK SUPPORT". | DOOR LOCK: CONSULT-III FUNCTION (BCM - DOOR LOCK) |
| 2. Check door switch. | DOOR SWITCH | |
| 3. Check key slot. | KEY SLOT | |
| 4. Check Intermittent Incident. | WATERPROOF CONNECTOR INSPECTION | |
| Power window down function does not operate. | 1. Check "PW DOWN SET" setting in "WORK SUPPORT". | INTELLIGENT KEY |
| 2. Check Intelligent Key battery inspection. | INTELLIGENT KEY |