LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2004 >> Altima S, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 1031 (Door & Lock) >> On-Vehicle Repair >> Trunk Lid >> Trunk Lid Assembly >> TRUNK LID ASSEMBLY: Adjustment >> Longitudinal Clearance

Longitudinal Clearance

WARNING: This page is about a different car, the 2009 Nissan Maxima. However, it is still accessible from the selected car via links, so may be relevant.

Trunk Lid Removed From Hinge

  1. Check the clearance and the evenness between the trunk lid and each part by visual and tactile feeling.
  2. Loosen the trunk lid to hinge bolts.
  3. Move the trunk lid so that the clearance measurements are within specifications.
  4. Tighten the trunk lid to hinge bolts.

Trunk Lid Hinge Removed From Vehicle

  1. Remove the parcel shelf trim. Refer to "REMOVAL AND INSTALLATION ".
  2. Loosen the hinge to parcel shelf bolts.
  3. Move the trunk lid so that the clearance measurements are within specifications.
  4. Tighten the hinge to parcel shelf bolts.
  5. Install the parcel shelf trim. Refer to "REMOVAL AND INSTALLATION ".
scientia non olet · About LEMON Manuals