LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2004 >> Altima S, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 1031 (Door & Lock) >> On-Vehicle Repair >> Front Fender >> Removal and Installation >> Removal

Removal and Installation: Removal

WARNING: This page is about a different car, the 2009 Nissan Maxima. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the head lamp. Refer to "REMOVAL AND INSTALLATION ".
  2. Remove cowl top side trim cover. EXT-18, "Removal and Installation"
  3. Remove the bolts and the front fender.
CAUTION:
  • While removing use a shop cloth to protect body from damaging.
  • Use care when removing the front fender. The front fender baffle foam adheres the front fender to the body side outer. Carefully release the foam or damage to the fender may occur.
scientia non olet · About LEMON Manuals