Component Function Check
WARNING: This page is about a different car, the 2009 Nissan Maxima. However, it is still accessible from the selected car via links, so may be relevant.
- CHECK FUNCTION
With CONSULT-III
Check KEY SW -SLOT in Data Monitor mode with CONSULT-III.
MONITOR ITEM CONDITION CHART
| Monitor item | Condition |
|---|---|
| KEY SW-SLOT | Key is inserted in key slot: ON |
| Key is removed from key slot: OFF |
Is the inspection result normal?
YES: Key slot is OK.
NO: Refer to "DIAGNOSIS PROCEDURE ".