Inspect The Function Of The Anti-Pinch System
WARNING: This page is about a different car, the 2009 Nissan Maxima. However, it is still accessible from the selected car via links, so may be relevant.
- Fully open the door glass.
- Place a wooden piece (wooden hammer handle, etc.) at near fully closed position.
- Carry out fully closing operation with auto up switch.CAUTION:
- Do not inspect the anti-pinch system by using a hand or finger. Work carefully not to be pinched.
- Check that auto up function is normal before inspection following the system initialization.
- Check that the glass reverses without pinching the wooden piece, is lowered approx. 150 mm (5.91 in) or for 2 seconds, and then stops.
- The glass should not be raised with power window main switch operated while it is reversing or lowering.