LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2004 >> Altima S, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 1028 (Interior Trim) >> On-Vehicle Repair >> Rear Parcel Shelf Finisher >> Removal and Installation >> Removal

Removal and Installation: Removal

WARNING: This page is about a different car, the 2009 Nissan Maxima. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the halo upper frame assembly for bench seat or seat back for bucket seat. Refer to "REMOVAL AND INSTALLATION " for bench seat (w/o climate controlled seats), or "REMOVAL AND INSTALLATION " for bucket seat (w/o climate controlled seats), or "REMOVAL AND INSTALLATION " for buck seat (with climate controlled seats.
  2. Remove high mounted stop lamp, if equipped. Refer to "REMOVAL AND INSTALLATION ".
  3. Remove rear pillar finisher RH/LH. Refer to "REMOVAL AND INSTALLATION ".
  4. Thread the rear seat belt RH/LH/center through vertical opening and release from rear parcel shelf finisher.
  5. Release the clips, then remove rear parcel shelf finisher.
scientia non olet · About LEMON Manuals