LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2004 >> Altima S, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 1025 (Seats) >> With Climate Controlled Seats >> Component Diagnosis >> Power Supply And Ground Circuit >> Climate Controlled Seat Control Unit >> CLIMATE CONTROLLED SEAT CONTROL UNIT: Component Inspection (Climate Controlled Seat Relay)

CLIMATE CONTROLLED SEAT CONTROL UNIT: Component Inspection (Climate Controlled Seat Relay)

WARNING: This page is about a different car, the 2009 Nissan Maxima. However, it is still accessible from the selected car via links, so may be relevant.
  1. CHECK CLIMATE CONTROLLED SEAT RELAY
    1. Apply battery voltage between terminals 2 and 1 of the climate controlled seat relay.
      CAUTION: Connect a fuse between the terminals when applying battery voltage.
    2. Check continuity between climate controlled seat relay terminals 5 and 3.
      CONTINUITY CHART

      Climate Controlled Seat Relay Terminals Condition Continuity
      5 and 3 Battery voltage applied between terminals 2 and 1. Yes

      Is the inspection result normal? 

      YES: Inspection End.

      NO: Replace climate controlled seat relay.

      Fig 1: Checking Continuity Between Climate Controlled Seat Relay Terminals 5 And 3
      G04903394Courtesy of NISSAN MOTOR CO., U.S.A.
scientia non olet · About LEMON Manuals