LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2004 >> Altima S, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 1025 (Seats) >> With Climate Controlled Seats >> Component Diagnosis >> Climate Controlled Seat Blower Motor >> Component Inspection (Climate Controlled Seat Blower Motor)

Component Inspection (Climate Controlled Seat Blower Motor)

WARNING: This page is about a different car, the 2009 Nissan Maxima. However, it is still accessible from the selected car via links, so may be relevant.
  1. CHECK CLIMATE CONTROLLED SEAT BLOWER MOTOR PART 1
    1. Turn ignition switch OFF.
    2. Disconnect climate controlled seat blower motor connector.
    3. Measure the resistance of the climate controlled seat blower motor between terminals 2 and 4.
    RESISTANCE REFERENCE

    Climate Controlled Seat Blower Motor Terminals Resistance
    2 4 600 - 800 Ω

    Is the inspection result normal? 

    YES: GO TO 2.

    NO: Replace climate controlled seat blower motor. Refer to "EXPLODED VIEW ".

    Fig 1: Measuring Resistance Of Climate Controlled Seat Blower Motor Between Terminals 2 And 4
    G05876220Courtesy of NISSAN MOTOR CO., U.S.A.
  2. CHECK CLIMATE CONTROLLED SEAT BLOWER MOTOR PART 2

    Measure the resistance of the climate controlled seat blower motor between terminals 3 and 4.

    RESISTANCE REFERENCE

    Climate Controlled Seat Blower Motor Terminals Resistance
    3 4 2500 - 2800 Ω

    Is the inspection result normal? 

    YES: Inspection End.

    NO: Replace climate controlled seat blower motor. Refer to "EXPLODED VIEW ".

    Fig 2: Measuring Resistance Of Climate Controlled Seat Blower Motor Between Terminals 3 And 4
    G05876221Courtesy of NISSAN MOTOR CO., U.S.A.
scientia non olet · About LEMON Manuals