LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2004 >> Altima S, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 1025 (Seats) >> W/O Climate Controlled Seats >> On-Vehicle Repair >> Rear Seat >> Removal and Installation >> Bench Seatback

Bench Seatback

WARNING: This page is about a different car, the 2009 Nissan Maxima. However, it is still accessible from the selected car via links, so may be relevant.

Removal

  1. Lock seat backs in upright position.
  2. Remove the lower frame halo anchor bolts and nut.
  3. Fold seat backs forward.
    Fig 1: Identifying Seatback Frame Bolts And Nut
    G05876275Courtesy of NISSAN MOTOR CO., U.S.A.
  4. Remove latch covers (A).
  5. Remove upper frame halo bolts (B).
  6. Remove the seatback assembly.
    Fig 2: Identifying Upper Frame Halo Bolts And Latch Covers
    G05876327Courtesy of NISSAN MOTOR CO., U.S.A.

Installation

Installation is in the reverse order of removal.

scientia non olet · About LEMON Manuals