PASSENGER SIDE: Disassembly

WARNING: This page is about a different car, the 2009 Nissan Maxima. However, it is still accessible from the selected car via links, so may be relevant.

NOTE: If the vehicle has been involved in a collision, the seat must be inspected for damage. Refer to "FOR FRONTAL COLLISION ".

SEATBACK BOARD

Disassembly

Remove the seat from the vehicle. Refer to "REMOVAL AND INSTALLATION "
Release the clips (D) from the seat cushion springs.
Pull the bottom of the backboard upward enough to release the inner clips (C).
Insert the proper tool to release the pawls (B).
Pull the backboard downward to disengage the hooks (A) and remove the backboard.

Fig 1: Identifying Clips, Hooks And Pawls
Courtesy of NISSAN MOTOR CO., U.S.A.

Assembly

Assembly is in the reverse order of disassembly.