Inspection After Removal

WARNING: This page is about a different car, the 2009 Nissan Maxima. However, it is still accessible from the selected car via links, so may be relevant.

Lining Thickness Inspection

Check thickness of lining.
Standard thickness (new) (A): Refer to "PARKING DRUM BRAKE ".

Wear limit thickness (A): Refer to "PARKING DRUM BRAKE ".

Fig 1: Checking Lining Thickness
Courtesy of NISSAN MOTOR CO., U.S.A.

Disc Rotor Inner Diameter Inspection

Check inner diameter of drum (in disc).
Standard inner diameter (new): Refer to "PARKING DRUM BRAKE ".

Wear limit of inner diameter: Refer to "PARKING DRUM BRAKE ".

Fig 2: Checking Drum Inner Diameter
Courtesy of NISSAN MOTOR CO., U.S.A.

Other Inspections

Check the following:
- Lining for excessive wear, damage, and peeling.
- Shoe sliding surface for excessive wear and damage.
- Anti-rattle pin for excessive wear and corrosion.
- Return spring for sagging.
Make sure that adjuster moves smoothly.
Visually check the inside of drum for excessive wear, cracks, and damage.
Replace with new parts as necessary.