LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2004 >> Altima S, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 1022 (Brake System) >> On-Vehicle Repair >> Vacuum Lines >> Removal and Installation >> Removal

Removal and Installation: Removal

WARNING: This page is about a different car, the 2009 Nissan Maxima. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disconnect the vacuum hose from the brake booster.
  2. Disconnect the vacuum hose from the intake manifold.
  3. Release the clips and remove the vacuum pipe with the vacuum hoses attached.
  4. Remove the vacuum hoses from the vacuum pipe.
scientia non olet · About LEMON Manuals