LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2004 >> Altima S, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 1022 (Brake System) >> On-Vehicle Repair >> Rear Disc Brake >> Removal and Installation of Brake Pads >> Removal

Removal and Installation of Brake Pads: Removal

WARNING: This page is about a different car, the 2009 Nissan Maxima. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the rear wheel and tire. Refer to "ADJUSTMENT ".
  2. Remove the upper sliding pin bolt and loosen the lower sliding pin bolt to swing the cylinder body down.
  3. Remove the pads, pad retainers, shims, and shim covers from the torque member.
    CAUTION: Do not deform the pad retainers when removing them from the torque member.
scientia non olet · About LEMON Manuals