LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2004 >> Altima S, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 1022 (Brake System) >> On-Vehicle Repair >> Front Disc Brake >> Removal and Installation of Brake Pads >> Removal

Removal and Installation of Brake Pads: Removal

WARNING: This page is about a different car, the 2009 Nissan Maxima. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove front wheel and tire. Refer to "ADJUSTMENT ".
  2. Remove upper and lower sliding pin bolts (2) without disconnecting the union bolt (1).
    Fig 1: Identifying Sliding Pin Bolts And Union Bolt
    G05877348Courtesy of NISSAN MOTOR CO., U.S.A.
  3. Hang cylinder body with a wire, and do not twist or stretch the brake hose.
  4. Remove anti-rattle clips, pads, shims, and shim covers from torque member.
scientia non olet · About LEMON Manuals