Removal and Installation of Rear Brake Piping and Brake Hose: Removal

WARNING: This page is about a different car, the 2009 Nissan Maxima. However, it is still accessible from the selected car via links, so may be relevant.

Remove the rear wheel and tire. Refer to "ADJUSTMENT ".
Drain brake fluid. Refer to "DRAIN AND REFILL ".
Disconnect brake hose from brake tube, using a suitable tool.
Remove lock plate and then remove brake hose from bracket.

Fig 1: Identifying Brake Tube To Brake Hose
Courtesy of NISSAN MOTOR CO., U.S.A.
Remove union bolt (A), and then remove brake hose from brake caliper assembly.

Fig 2: Identifying Union Bolt
Courtesy of NISSAN MOTOR CO., U.S.A.