LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2004 >> Altima S, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 1022 (Brake System) >> On-Vehicle Repair >> Brake Tube And Hose >> Removal and Installation of Front Brake Piping and Brake Hose >> Removal

Removal and Installation of Front Brake Piping and Brake Hose: Removal

WARNING: This page is about a different car, the 2009 Nissan Maxima. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the front wheel and tire. Refer to "ADJUSTMENT ".
  2. Drain brake fluid. Refer to "DRAIN AND REFILL ".
  3. Disconnect brake hose from brake tube, using a suitable tool.
  4. Remove lock plate and then remove brake hose from bracket.
    Fig 1: Identifying Brake Tube To Brake Hose
    G04902201Courtesy of NISSAN MOTOR CO., U.S.A.
  5. Remove union bolt (A) and then remove brake hose from brake caliper assembly.
    Fig 2: Identifying Union Bolt
    G05877333Courtesy of NISSAN MOTOR CO., U.S.A.
scientia non olet · About LEMON Manuals