LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2004 >> Altima S, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 1022 (Brake System) >> On-Vehicle Repair >> Brake Master Cylinder >> Removal and Installation >> Removal

Removal and Installation: Removal

WARNING: This page is about a different car, the 2009 Nissan Maxima. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the engine room cover.
  2. Remove the air cleaner assembly. Refer to "REMOVAL AND INSTALLATION ".
  3. Drain brake fluid. Refer to "DRAIN AND REFILL ".
  4. Disconnect brake fluid level switch harness connector.
  5. Disconnect master cylinder brake tubes, using a suitable tool.
  6. Remove master cylinder nuts and remove master cylinder assembly.
scientia non olet · About LEMON Manuals