Diagnosis Procedure
WARNING: This page is about a different car, the 2009 Nissan Maxima. However, it is still accessible from the selected car via links, so may be relevant.
- CHECK VOLTAGE REGULATOR CIRCUIT CONNECTION
Check to see if connector F7 terminal 3 is clean and tight.
Is the inspection result normal?
YES: GO TO 2
NO: Repair terminal connection. Confirm repair by performing complete Starting/Charging system test. Refer to diagnostic station instruction manual.
- CHECK VOLTAGE REGULATOR CIRCUIT
Check voltage between generator harness connector F7 terminal 3 and ground.
3 - ground: Battery voltage
Does battery voltage exist?
YES: Refer to "WORK FLOW ".
NO: Check harness for open between generator and fuse.