Removal Of Liquid Gasket Sealing
WARNING: This page is about a different car, the 2009 Nissan Maxima. However, it is still accessible from the selected car via links, so may be relevant.
- After removing nuts and bolts, separate the mating surface using Tool and remove old liquid gasket sealing.
Tool number: KV10111100 (J-37228)
CAUTION:
Be careful not to damage the mating surfaces.
- Tap (1) Tool to insert it, and then slide it (2) by tapping on the side as shown.
- In areas where Tool is difficult to use, use plastic hammer to lightly tap the parts, to remove it.
CAUTION:
If for some unavoidable reason tool such as screwdriver is used, be careful not to damage the mating surfaces.