LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2004 >> Altima S, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 1017 (Front Axle) >> On-Vehicle Repair >> Front Drive Shaft >> Removal and Installation (Left Side) >> Inspection After Installation

Inspection After Installation

WARNING: This page is about a different car, the 2009 Nissan Maxima. However, it is still accessible from the selected car via links, so may be relevant.
  1. Check wheel alignment. Refer to "INSPECTION AND ADJUSTMENT ".
  2. Adjust neutral position of steering angle sensor. Refer to "ADJUSTMENT OF STEERING ANGLE SENSOR NEUTRAL POSITION: SPECIAL REPAIR REQUIREMENT ".
scientia non olet · About LEMON Manuals