LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2004 >> Altima S, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 1014 (Meter, Warning Lamp & Indicator) >> On-Vehicle Repair >> Meter Control Switch >> Removal and Installation >> Removal

Removal and Installation: Removal

WARNING: This page is about a different car, the 2009 Nissan Maxima. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disconnect the negative battery terminal.
  2. Remove the cluster lid A. Refer to "REMOVAL AND INSTALLATION ".
  3. Detach the combination meter control switch harness clips (A), then remove the combination meter control switch screws (B) and remove the combination meter control switch (1).
Fig 1: Identifying Meter Control Switch Components
G05879308Courtesy of NISSAN MOTOR CO., U.S.A.
scientia non olet · About LEMON Manuals