LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2004 >> Altima S, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 1014 (Meter, Warning Lamp & Indicator) >> On-Vehicle Repair >> Combination Meter >> Removal and Installation >> Removal

Removal and Installation: Removal

WARNING: This page is about a different car, the 2009 Nissan Maxima. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disconnect the negative battery terminal.
  2. Remove the cluster lid A. Refer to "REMOVAL AND INSTALLATION ".
  3. Remove the combination meter screws (A) using power tools.
  4. Pull out the combination meter (1), then disconnect the combination meter connectors and remove the combination meter (1).
Fig 1: Identifying Combination Meter And Cluster Lid
G05879307Courtesy of NISSAN MOTOR CO., U.S.A.
scientia non olet · About LEMON Manuals