LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2004 >> Altima S, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 1014 (Meter, Warning Lamp & Indicator) >> Ecu Diagnosis >> Combination Meter >> Fail Safe

Fail Safe

WARNING: This page is about a different car, the 2009 Nissan Maxima. However, it is still accessible from the selected car via links, so may be relevant.

The combination meter performs a fail-safe operation for the functions listed below when communication is lost.

FAIL SAFE CHART

Function Specifications
Speedometer Zero indication.
Tachometer
Fuel gauge
Engine coolant temperature gauge
Illumination control Meter illumination Change to nighttime mode when communication is lost.
Segment LCD Odometer Freeze current indication.
CVT position Display turns off.
Buzzer Buzzer turns off.
Warning lamp/indicator lamp ABS warning lamp Lamp turns on when communication is lost.
Brake warning lamp
TCS/VDC OFF indicator lamp
SLIP indicator lamp
A/T CHECK warning lamp Lamp turns off when communication is lost.
Oil pressure warning lamp
Malfunction indicator lamp
Master warning lamp
Air bag warning lamp
High beam indicator
Turn signal indicator lamp
Intelligent Key system warning lamp
Driver and passenger seat belt warning lamp Lamp turns off when disconnected.
Charge warning lamp
Security indicator lamp
Low tire pressure warning lamp Lamp will flash every second for 1 minute and then stay on continuously thereafter.