LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2004 >> Altima S, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 1014 (Meter, Warning Lamp & Indicator) >> Component Diagnosis >> Parking Brake Switch Signal Circuit >> Component Inspection

Component Inspection

WARNING: This page is about a different car, the 2009 Nissan Maxima. However, it is still accessible from the selected car via links, so may be relevant.
  1. CHECK PARKING BRAKE SWITCH

    Check continuity between parking brake switch terminal 1 and switch case ground.

    TERMINALS CONTINUITY REFERENCE

    Component Terminal Condition Continuity
    Parking brake switch 1 Parking brake applied Yes
    Parking brake released No
    Fig 1: Checking Continuity Between Parking Brake Switch Terminal 1 And Switch Case Ground
    G05879178Courtesy of NISSAN MOTOR CO., U.S.A.

    Is the inspection result normal? 

    YES: Inspection End.

    NO: Replace parking brake switch.