Component Function Check

WARNING: This page is about a different car, the 2009 Nissan Maxima. However, it is still accessible from the selected car via links, so may be relevant.

COMBINATION METER INPUT SIGNAL

Select "METER/M&A" on CONSULT-III.
Using "FUEL METER" of "DATA MONITOR", compare the value of DATA MONITOR with fuel gauge pointer of combination meter.

DATA MONITOR REFERENCE

Fuel gauge pointer	Reference value of data monitor [lit.]
Full	Approx. 68
3/4	Approx. 56
1/2	Approx. 38
1/4	Approx. 22
Empty	Approx. 4

Does the data monitor value approximately match the fuel gauge indication?

YES: Inspection End.

NO: Replace combination meter. Refer to "REMOVAL AND INSTALLATION ".