LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2004 >> Altima S, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 1014 (Meter, Warning Lamp & Indicator) >> Component Diagnosis >> DTC U1000 Can Communication >> Diagnosis Procedure

Diagnosis Procedure

WARNING: This page is about a different car, the 2009 Nissan Maxima. However, it is still accessible from the selected car via links, so may be relevant.

Symptom: Displays "CAN COMM CIRC [U1000]" as a self-diagnosis result of combination meter.

  1. CHECK CAN COMMUNICATION

    Select "SELF-DIAG RESULTS" mode for "METER/M&A" with CONSULT-III.

    Go to "LAN system". Refer to "CONDITION OF ERROR DETECTION ".

scientia non olet · About LEMON Manuals