LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2004 >> Altima S, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 1014 (Meter, Warning Lamp & Indicator) >> Component Diagnosis >> Ambient Sensor Signal Circuit >> Component Function Check

Component Function Check

WARNING: This page is about a different car, the 2009 Nissan Maxima. However, it is still accessible from the selected car via links, so may be relevant.
  1. COMBINATION METER INPUT SIGNAL
    1. Select "METER/M&A" on CONSULT-III.
    2. Using "OUTSIDE TEMP" on "DATA MONITOR", compare the value of DATA MONITOR with temperature display on combination meter. DATA MONITOR and combination meter indications should be close.

    Does the data monitor value approximately match the display on the combination meter? 

    YES: Inspection End.

    NO: Replace combination meter. Refer to "REMOVAL AND INSTALLATION ".

scientia non olet · About LEMON Manuals