LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2004 >> Altima S, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 1013 (Body Control System) >> Function Diagnosis >> Diagnosis System (BCM) >> Wiper >> WIPER: CONSULT - III Function (BCM-WIPER) >> Data Monitor

Data Monitor

WARNING: This page is about a different car, the 2009 Nissan Maxima. However, it is still accessible from the selected car via links, so may be relevant.
DATA MONITOR REFERENCE CHART

Monitor Item [Unit] Description
PUSH SW Displays the status of the engine switch (push switch) judged by BCM.
VEH SPEED 1 [km/h] Displays the value of the vehicle speed signal received from combination meter with CAN communication.
FR WIPER HI [OFF/ON] Status of each switch judged by BCM using the combination switch reading function
FR WIPER LOW [OFF/ON]
FR WASHER SW [OFF/ON]
FR WIPER INT [OFF/ON]
FR WIPER STOP [OFF/ON] Displays the status of the front wiper auto stop signal received from IPDM E/R with CAN communication.
INT VOLUME [1 - 7] Status of each switch judged by BCM using the combination switch reading function
scientia non olet · About LEMON Manuals