Data Monitor
WARNING: This page is about a different car, the 2009 Nissan Maxima. However, it is still accessible from the selected car via links, so may be relevant.
DATA MONITOR REFERENCE CHART
| Monitor item [Unit] | Description | ||
|---|---|---|---|
| PUSH SW [ON/OFF] | The switch status input from push-button ignition switch | ||
| ENGINE STATE [STOP/STALL/CRANK/RUN] | The engine status received from ECM with CAN communication | ||
| VEH SPEED 1 [km/h] | The value of the vehicle speed received from combination meter with CAN communication | ||
| KEY SW-SLOT [ON/OFF] | Key switch status input from key slot | ||
| TURN SIGNAL R [ON/OFF] | Each switch status that BCM judges from the combination switch reading function | ||
| TURN SIGNAL L [ON/OFF] | |||
| TAIL LAMP SW [ON/OFF] | |||
| HI BEAM SW [ON/OFF] | |||
| HEAD LAMP SW1 [ON/OFF] | |||
| HEAD LAMP SW2 [ON/OFF] | |||
| PASSING SW [ON/OFF] | |||
| AUTO LIGHT SW [ON/OFF] | |||
| FR FOG SW [ON/OFF] | |||
| DOOR SW-DR [ON/OFF] | The switch status input from front door switch LH | ||
| DOOR SW-AS [ON/OFF] | The switch status input from front door switch RH | ||
| DOOR SW-RR [ON/OFF] | The switch status input from rear door switch RH | ||
| DOOR SW-RL [ON/OFF] | The switch status input from rear door switch LH | ||
| DOOR SW-BK(1) [ON/OFF] | - | ||
| OPTICAL SENSOR [V] | The value of exterior brightness voltage input from the optical sensor | ||
|
|||