LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2004 >> Altima S, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 1012 (SRS Airbag Control System) >> Component Diagnosis >> B1086 - B1089 Seat Belt Pre-TENSIONER LH >> DTC Logic >> DTC Detection Logic

DTC Detection Logic

WARNING: This page is about a different car, the 2009 Nissan Maxima. However, it is still accessible from the selected car via links, so may be relevant.

With CONSULT-III

DTC DETECTION LOGIC CHART

CONSULT-III name DTC DTC detecting condition Repair order
PRE-TEN FRONT LH [OPEN] B1086 LH seat belt pre-tensioner circuit is open.
  1. Visually check the wiring harness connection.
  2. Replace the harness if it has visible damage.
  3. Replace the front LH seat belt pre-tensioner.
  4. Replace the air bag diagnosis sensor unit.
  5. Replace the related harness.
PRE-TEN FRONT LH [VB-SHORT] B1087 LH seat belt pre-tensioner circuit is shorted to a power supply circuit.
PRE-TEN FRONT LH [GND-SHORT] B1088 LH seat belt pre-tensioner circuit is shorted to ground.
PRE-TEN FRONT LH [SHORT] B1089 LH seat belt pre-tensioner circuits are shorted to each other.

Without CONSULT-III

FLASH PATTERN REFERENCE CHART

<Front LH seat belt pre-tensioner>
Flash pattern Repair order
G04916683Courtesy of NISSAN MOTOR CO., U.S.A.
  1. Visually check the wiring harness connections.
  2. Replace the harness if it has visible damage.
  3. Replace front LH seat belt pre-tensioner.
  4. Replace the air bag diagnosis sensor unit.
  5. Replace the related harness.