LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2004 >> Altima S, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 1012 (SRS Airbag Control System) >> Component Diagnosis >> B1065 - B1068, B1070 - B1073 Passenger Airbag Module >> DTC Logic >> DTC Detection Logic

DTC Detection Logic

WARNING: This page is about a different car, the 2009 Nissan Maxima. However, it is still accessible from the selected car via links, so may be relevant.

With CONSULT-III

DTC DETECTION LOGIC CHART

CONSULT-III name DTC DTC detecting condition Repair order
ASSIST A/B MODULE [OPEN] B1065 Front passenger air bag module circuit (AS1) is open.
  1. Visually check the wiring harness connection.
  2. Replace the harness if it has visible damage.
  3. Replace the front passenger air bag module.
  4. Replace the air bag diagnosis sensor unit.
  5. Replace the related harness.
B1070 Front passenger air bag module circuit (AS2) is open.
ASSIST A/B MODULE
[VB-SHORT]
B1066 Front passenger air bag module circuit (AS1) is shorted to a power supply circuit.
B1071 Front passenger air bag module circuit (AS2) is shorted to a power supply circuit.
ASSIST A/B MODULE [GND-SHORT] B1067 Front passenger air bag module circuit (AS1) is shorted to ground.
B1072 Front passenger air bag module circuit (AS2) is shorted to ground.
ASSIST A/B MODULE [SHORT] B1068 Front passenger air bag module circuits (AS1) are shorted to each other.
B1073 Front passenger air bag module circuits (AS2) are shorted to each other.

Without CONSULT-III

FLASH PATTERN REFERENCE CHART

<Front passenger air bag module>
Flash pattern Repair order
G04916680Courtesy of NISSAN MOTOR CO., U.S.A.
  1. Visually check the wiring harness connection.
  2. Replace the harness if it has visible damage.
  3. Replace front passenger air bag module.
  4. Replace the air bag diagnosis sensor unit.
  5. Replace the related harness.