LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2004 >> Altima S, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 1012 (SRS Airbag Control System) >> Component Diagnosis >> B1033 - B1035 Crash Zone Sensor >> DTC Logic >> DTC Detection Logic

DTC Detection Logic

WARNING: This page is about a different car, the 2009 Nissan Maxima. However, it is still accessible from the selected car via links, so may be relevant.

With CONSULT-III

DTC DETECTION LOGIC CHART

CONSULT-III name DTC DTC detecting condition Repair order
CRASH ZONE SEN [UNIT FAIL] B1033 Crash zone sensor has malfunctioned.
  1. Visually check the wiring harness connection.
  2. Replace the harness if it has visible damage.
  3. Replace the crash zone sensor.
  4. Replace the air bag diagnosis sensor unit.
  5. Replace the related harness.
B1034
CRASH ZONE SEN [COMM FAIL] B1035 Crash zone sensor communication error.

Without CONSULT-III

FLASH PATTERN REFERENCE CHART

<Crash zone sensor>
Flash pattern Repair order
G04916681Courtesy of NISSAN MOTOR CO., U.S.A.
  1. Visually check the wiring harness connection.
  2. Replace the harness if it has visible damage.
  3. Replace the crash zone sensor.
  4. Replace the air bag diagnosis sensor unit.
  5. Replace the related harness.
scientia non olet · About LEMON Manuals