DTC CONFIRMATION PROCEDURE (Without CONSULT-III)
WARNING: This page is about a different car, the 2009 Nissan Maxima. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
SRS will not enter Diagnosis mode if no malfunction is detected in User mode.
- IGNITION SWITCH
Turn ignition switch ON.
: GO TO 2
- IGNITION SWITCH
After air bag warning lamp lights for 7 seconds, turn ignition switch OFF within 1 second.
: GO TO 3
- WAIT TIME
Wait more than 3 seconds.
: GO TO 4
- REPEAT STEPS
Repeat steps 1 to 3 twice.
: GO TO 5
- IGNITION SWITCH
Turn ignition switch ON.
: GO TO 6
- DIAGNOSTIC MODE
SRS system is now in Diagnostic mode and AIR BAG warning lamp flashes. Refer to "TROUBLE DIAGNOSIS WITHOUT CONSULT-III ".
: END