Pad Wear

WARNING: This page is about a different car, the 2009 Nissan Maxima. However, it is still accessible from the selected car via links, so may be relevant.

Check pad thickness from an inspection hole on cylinder body.

Fig 1: Checking Pad Thickness From An Inspection Hole On Cylinder Body

Courtesy of NISSAN MOTOR CO., U.S.A.

Check using a scale if necessary.

Standard

Standard thickness: Refer to "FRONT DISC BRAKE "

Limit

Wear limit thickness: Refer to "FRONT DISC BRAKE "

Check pad thickness from an inspection hole on cylinder body. Check using a scale if necessary.

Fig 1: Checking Pad Thickness From An Inspection Hole On Cylinder Body
Courtesy of NISSAN MOTOR CO., U.S.A.

Standard

Standard thickness: 8.5 mm (0.335 in)

Repair limit thickness: 1.0 mm (0.039 in)