LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2004 >> Altima S, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 1009 (Power Steering System) >> On-Vehicle Repair >> Power Steering Oil Pump >> Removal and Installation >> Removal

Removal and Installation: Removal

WARNING: This page is about a different car, the 2009 Nissan Maxima. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove front tire (RH) using power tool. Refer to "ADJUSTMENT ".
  2. Remove engine side undercover.
  3. Remove hood ledge cover (RH).
  4. Drain power steering fluid. Refer to "DRAINING ".
  5. Disconnect high pressure piping and suction hose from power steering oil pump. Refer to "EXPLODED VIEW ".
  6. Loosen drive belt. Refer to "REMOVAL AND INSTALLATION ".
  7. Remove drive belt from power steering oil pump pulley.
  8. Remove power steering oil pump bolts, and then remove power steering oil pump.