LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2004 >> Altima S, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 1007 (Wiper & Washer) >> Function Diagnosis >> Diagnosis System (IPDM E/R) >> Diagnosis Description >> Auto Active Test >> Inspection in Auto Active Test Mode

Inspection in Auto Active Test Mode

WARNING: This page is about a different car, the 2009 Nissan Maxima. However, it is still accessible from the selected car via links, so may be relevant.

When auto active test mode is actuated, the following 6 steps are repeated 3 times.

AUTO ACTIVE TEST MODE OPERATION CHART

Operation sequence Inspection Location Operation
1 Oil pressure warning lamp Blinks continuously during operation of auto active test
2 Front wiper LO for 5 seconds → HI for 5 seconds
3
  • Parking lamps
  • License plate lamps
  • Tail lamps
  • Front fog lamps (if equipped)
10 seconds
4 Headlamps LO ↔ HI 5 times
5 A/C compressor (magnet clutch) ON ↔ OFF 5 times
6(1) Cooling fans MID for 5 seconds → HI for 5 seconds
(1) Outputs duty ratio of 50% for 5 seconds → duty ratio of 100% for 5 seconds on the cooling fan control module.