LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2004 >> Altima S, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 1007 (Wiper & Washer) >> Component Diagnosis >> Front Wiper Auto Stop Signal Circuit >> Component Function Check

Component Function Check

WARNING: This page is about a different car, the 2009 Nissan Maxima. However, it is still accessible from the selected car via links, so may be relevant.
  1. CHECK FRONT WIPER (AUTO STOP) OPERATION

    CONSULT-III DATA MONITOR

    1. Select "FRONT WIPER STOP" of IPDM E/R DATA MONITOR item.
    2. Operate the front wiper.
    3. With the front wiper operation, check the monitor status.
    FRONT WIPER (AUTO STOP) OPERATION CHART

    Monitor item Condition Monitor status
    FR WIPER STOP Front wiper motor Stop position STOP P
    Except ACT P

    Is the status of item normal? 

    YES: Auto stop signal circuit is normal.

    NO: Refer to "DIAGNOSIS PROCEDURE ".