LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2004 >> Altima S, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 1006 (Front Suspension) >> Service Data And Specifications (SDS) >> Wheel Alignment (Unladen*)

Wheel Alignment (Unladen*)

WARNING: This page is about a different car, the 2009 Nissan Maxima. However, it is still accessible from the selected car via links, so may be relevant.
WHEEL ALIGNMENT SERVICE DATA SPECIFICATIONS

Market USA/Canada Mexico
Tire size 245/45R18 245/40R19 245/45R18 245/40R19
Camber Degree minute (Decimal degree) LH Minimum -1°5' (-1.10°) -1°10' (-1.15°) -0°55' (-0.95°)
Nominal -0°20' (-0.35°) -0°40' (-0.65°) -0°10' (-0.20°)
Maximum 0°25' (0.40°) 0°20' (0.35°) 0°35' (0.55°)
RH Minimum -1°20' (-1.35°) -1°25' (-1.40°) -1°10' (-1.20°)
Nominal -0°35' (-0.60°) -0°40' (-0.65°) -0°25' (-0.45°)
Maximum 0°10' (0.15°) 0°05' (0.10°) 0°20' (0.30°)
Maximum left and right difference -0°15' ± 0°33' (-0.25° ± 0.55°)
Caster Degree minute (Decimal degree) Against ground surface Minimum 4°10' (4.20°) 4°15' (4.25°) 3°45' (3.75°)
Nominal 4°55' (4.95°) 5°00' (5.00°) 4°30' (4.50°)
Maximum 5°40' (5.70°) 5°45' (5.75°) 5°15' (5.25°)
Maximum left and right difference 0°33' (0.55°)
Kingpin offset Degree minute (Decimal degree) Minimum 13°40' (13.65°) 13°20' (13.35°)
Nominal 14°25' (14.40°) 14°05' (14.10°)
Maximum 15°10' (15.15°) 14°50' (14.85°)
G04902060Courtesy of NISSAN MOTOR CO., U.S.A.
Total toe-in Distance (A - B) Minimum 0 mm
Nominal 1 mm
Maximum 2 mm
Wheel turning angle Refer to "STEERING ANGLE "

*: Fuel, radiator coolant and engine oil full. Spare tire, jack, hand tools and mats in designated positions.