LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2004 >> Altima S, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 1006 (Front Suspension) >> On-Vehicle Repair >> Front Stabilizer >> Removal and Installation >> Removal

Removal and Installation: Removal

WARNING: This page is about a different car, the 2009 Nissan Maxima. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove steering gear and linkage. Refer to "REMOVAL AND INSTALLATION ".
  2. Remove nuts on upper portion of stabilizer connecting rod.
    Fig 1: Connecting Rod From Front Strut Using Power Tool
    G04887044Courtesy of NISSAN MOTOR CO., U.S.A.
  3. Remove stabilizer clamp bolts.
  4. Remove stabilizer from the vehicle.
scientia non olet · About LEMON Manuals