LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2004 >> Altima S, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 1004 (Tires, Wheels & Tire Pressure Monitoring System (TPMS)) >> On-Vehicle Repair >> Tire Pressure Receiver >> Removal and Installation >> Removal

Removal and Installation: Removal

WARNING: This page is about a different car, the 2009 Nissan Maxima. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove instrument lower cover (LH). Refer to "EXPLODED VIEW ".
  2. Locate tire pressure receiver (1) to the right of the steering column and disconnect tire pressure receiver electrical connector.
  3. Remove tire pressure receiver (1) from bracket using a suitable tool to release the bracket.
    Fig 1: Identifying Tire Pressure Receiver
    G05877207Courtesy of NISSAN MOTOR CO., U.S.A.
scientia non olet · About LEMON Manuals